top of page

Остеометрични дъски и шублери

Lab Osteometric Board
$1100.00
Features 1" thick acrylic base sheet and Kydex vertical measurement planes for extreme durability.
Constructed of acrylic, aluminum, brass, and stainless steel.
Provides the durability and accuracy required for years of reliable service.
Provides unparalleled linear tracking and fluidity of motion.
Measurement is accomplished via a linear scale (1/2 mm increment) mounted and indexed to the rear of the board.
End planes are removable for ease of shipment and storage.
ASME standardized.
Do not use the mounted scale alone to measure mid-shaft. The scale is offset to compensate for the thickness of the measuring plates and mounting point.
If you need a mid shaft measurement, ask us about our line of photographic rulers that can be used in connection with this board.
Features 1" thick acrylic base sheet and Kydex vertical measurement planes for extreme durability.
Constructed of acrylic, aluminum, brass, and stainless steel.
Provides the durability and accuracy required for years of reliable service.
Provides unparalleled linear tracking and fluidity of motion.
Measurement is accomplished via a linear scale (1/2 mm increment) mounted and indexed to the rear of the board.
End planes are removable for ease of shipment and storage.
ASME standardized.
Do not use the mounted scale alone to measure mid-shaft. The scale is offset to compensate for the thickness of the measuring plates and mounting point.
If you need a mid shaft measurement, ask us about our line of photographic rulers that can be used in connection with this board.

Field Osteometric Board
$799.00
-Composed of high impact Plexiglas and aluminum
-Reduced weight by over 70% compared to older boards.
-The Field Osteometric board features the same measurement method as the Laboratory Osteometric Board minus the rod and bearing assembly
-Collapsible to 12" x 6.5" x 1 1/2".
-Scales are laser etched directly onto the board's base along with guide lines (cm).
-Constructed of mostly Plexiglas.
-Board can be customized with your name or identification mark at no extra cost.
-ASME standardized.
-Composed of high impact Plexiglas and aluminum
-Reduced weight by over 70% compared to older boards.
-The Field Osteometric board features the same measurement method as the Laboratory Osteometric Board minus the rod and bearing assembly
-Collapsible to 12" x 6.5" x 1 1/2".
-Scales are laser etched directly onto the board's base along with guide lines (cm).
-Constructed of mostly Plexiglas.
-Board can be customized with your name or identification mark at no extra cost.
-ASME standardized.

Полева остеометрична дъска: Студентско издание
$60,00 -Точно до .5mm -Произведено от 1/4" -Черен лазерно гравиран акрил. -По-тясна измервателна повърхност (от стандартната дъска) и няма интегрирани вертикални измервателни равнини. -Вие предоставяте вертикалните измервателни повърхности (примери: книги с твърди корици, дървени блокове и т.н.) -Разделя се на две части за преносимост -стандартизирано по ASME -Идва с ръкав от микрофибър за почистване и съхранение.

Professional Grade Spreading Calipers: Pointed or Round End
$599.00
Measuring surface options:
Ground stainless steel ball ends: Long term accuracy and prevents damage.
Ground pointed ends: For precise measurement.
Main body is machined out of aircraft grade 1/4 inch aluminum plate.
Scale is machined stainless and permanently laser engraved 0 - 30 cm in 1mm increments.
Joint surface utilizes a stainless steel contact plate to afford even friction along the measurement range eliminating the need for a thumb lock.
Entire unit weighs in at less than 5 and 1/2 ounces.
Main body dimensions are 12" x 4" when closed.
ASME standardized.
Measuring surface options:
Ground stainless steel ball ends: Long term accuracy and prevents damage.
Ground pointed ends: For precise measurement.
Main body is machined out of aircraft grade 1/4 inch aluminum plate.
Scale is machined stainless and permanently laser engraved 0 - 30 cm in 1mm increments.
Joint surface utilizes a stainless steel contact plate to afford even friction along the measurement range eliminating the need for a thumb lock.
Entire unit weighs in at less than 5 and 1/2 ounces.
Main body dimensions are 12" x 4" when closed.
ASME standardized.

Разпръскващи шублери: Студентски
**Очаквайте скоро!** $99,00 Корпус и мащаб, обработени от неръждаема стомана 316 с дебелина 1,5 мм за издръжливост и спестявания. Индекс, изработен от машинно обработен морски месинг Съединения, подсигурени с алуминиеви нитове. Везни лазерно гравирани на същите стъпки като стандартния разпръскващ дебеломер с интерполация до . възможна точност Много издръжлив и ще продължи години на злоупотреба в лабораторията. Калъфът за разпръскване НЕ пасва на шублера за разпръскване на Student Всеки шублер се калибрира и проверява по същия метод като стандартните разпръскващи апарати. ASME стандартизиран. Ако някога ръцете се огънат, е много лесно да ги върнете в изправено положение. Ако изглеждат повредени извън възможността за ремонт, изпратете ми ги и аз ще го поправя безплатно, ако е възможно.
bottom of page